Skip to content

Cart

Your cart is empty

ORAVETTA Owner's Manual

NOVACCHI

ORAVETTA Owner’s Manual

Crafted for the Extraordinary

Welcome to ORAVETTA, a bracelet that tells time. A small display rests in a polished round case, and the rest of your day waits in the free BRfit app on your phone.

Looking for another model? See all Owner’s Manuals.

01 · Welcome

Welcome & Quick Start

ORAVETTA is a bracelet that tells time. A small OLED display sits inside a polished round case, and everything else lives in the free BRfit app on your phone.

ORAVETTA has a single touch area, just below the display, and no buttons. It shows the time, your steps and your readings on the wrist, and it shows a small icon when a message arrives. It has no vibration, speaker or microphone, so it stays silent.

The short path

  1. Charge to wake itORAVETTA may arrive switched off so it cannot turn on in transit. Attach the magnetic charging cable to the back of the case and plug it into a 5V USB power adapter. Charging wakes it up.Details in Charging & Power.
  2. Install BRfitDownload BRfit free from the App Store or Google Play, open it and allow the permissions it asks for.Links in Install BRfit & Connect.
  3. ConnectIn BRfit, tap Me, then Device Bind. Choose DM71, the Bluetooth name of ORAVETTA, and accept the pairing request on your phone.You are connected when a small signal icon appears on the time screen.
  4. Size and wearWear ORAVETTA snugly, with the sensor on the back against your skin. If it is loose, remove links with the included tool.Details in Fit & Sizing.
  5. Tap to exploreTap the touch area to move from screen to screen. Press and hold it to start or stop a reading.Details in Touch Controls & Screens.

If a step does not go as described, the matching row in Troubleshooting tells you what to check next.

02 · The Unboxing

In the Box & Your ORAVETTA

Everything you need to begin, presented in the NOVACCHI signature gift box.

ORAVETTA

The round case and its open-link bracelet, in Rose Gold or Silver.

Magnetic charging cable

A USB cable whose magnetic end attaches to the charging port on the back of the case. A wall adapter is not included; see Charging & Power for the adapter to use.

Link-removal tool

A small tool for removing bracelet links, so you can size ORAVETTA to your wrist.

Quick setup card

A card with two QR codes: one for quick setup, and one that opens this owner’s manual online.

Gift box

Please keep the gift box, the charging cable, the tool and any links you remove until you are sure ORAVETTA is staying with you. A return needs everything that came in the box.

Getting to know your ORAVETTA

Manufacturer’s diagram of ORAVETTA. Left, the front: the display in the center of the round case and a small circular touch area just below it. Right, the back: the heart-rate sensor in the center and the round charging port below it.
The manufacturer’s diagram. Left, the front of the case. Right, the back, which rests against your wrist.

Display

A 0.66-inch OLED display. It shows the time, date and day, and the screens you tap through.

Touch area

The small circle just below the display. It is the only control on ORAVETTA. Touch the circle itself; the rest of the display does not respond to touch.

Heart-rate and blood-oxygen sensor

The sensor window in the center of the back. It reads optically through your skin, so it needs to sit flat against your wrist and stay clean. It emits light while it works.

Charging port

The round contact below the sensor. The magnetic charging cable attaches here. Keep it clean and dry.

Charging light

A small light on the back that glows red while ORAVETTA charges and green when it is full.

03 · Preparation

Charging & Power

Charge ORAVETTA before you wear it for the first time. Charging also wakes it up.

Manufacturer’s diagram of the magnetic charging cable attached to the round charging port on the back of ORAVETTA, with the USB plug at the other end.
The magnetic end of the cable meets the charging port on the back of the case.

Before you charge

  • Make sure ORAVETTA, the charging port and the cable are dry. If anything is wet, let it dry completely first.
  • Charge on a stable, dry surface, away from heat and direct sunlight, and keep metal objects away from the magnetic end of the cable.
  • Do not wear ORAVETTA while it charges.
  1. Attach the cableBring the magnetic end of the cable to the charging port on the back of the case and let it settle squarely into place.
  2. Plug inConnect the USB end to a USB power adapter rated 5V. Do not use a power source rated above 5V, or a damaged cable or adapter.
  3. Watch the lightThe light on the back glows red while ORAVETTA charges and turns green when it is full. A full charge takes about 2 hours.
  4. Unplug in orderWhen the light is green, unplug the USB end from the power adapter first, then lift the magnetic end off ORAVETTA.

Keep the cable unplugged when not in use

When you are not charging, unplug the cable from the power adapter. A powered magnetic end can pick up metal objects such as keys or coins, which can cause a short circuit and damage.

Switching on and off

To switch on

Press and hold the touch area until the display lights. If ORAVETTA does not respond, place it on its charger, which also switches it on.

To switch off

Use Power off in the Settings screen. The steps are in Touch Controls & Screens.

Battery life

Typical use: 5 to 6 days on a charge. Standby: up to 35 days. These are the manufacturer’s estimates. Battery life varies with your settings and use, especially how often all-day readings are taken and how often the display wakes.

When the low-battery icon appears on the display, charge ORAVETTA soon.

Storing ORAVETTA

If you will not wear ORAVETTA for a while, charge it fully, then switch it off. Do not store it with a flat battery, which can damage the battery. Top it up about once a month while it is stored.

Battery safety

ORAVETTA has a built-in rechargeable lithium-ion battery that is not user-replaceable. Do not open, puncture, crush or heat the case, and do not try to remove or replace the battery.

Stop using and charging ORAVETTA straight away if it becomes unusually hot, swells, leaks, smokes, cracks, gives off an unusual odor or stops charging normally. Disconnect it from power and contact us.

04 · Connection

Install BRfit & Connect

ORAVETTA works with BRfit, a free companion app for iPhone and Android. No subscription is required.

Install BRfit

On iPhone, BRfit requires iOS 13.0 or later. On Android, install it from Google Play. Download it only from the official listings below. In the App Store it is listed as BR fit.

Connect ORAVETTA

Before you begin, make sure ORAVETTA is charged and switched on, Bluetooth is on, and ORAVETTA is close to your phone. Start the connection in BRfit rather than in your phone’s Bluetooth settings.

  1. Open BRfit and allow accessThe first time you open BRfit, it asks for several permissions. Allow them, especially Bluetooth (on Android this can appear as Nearby devices). BRfit needs Bluetooth to find and connect to ORAVETTA.
  2. Go to Device BindTap Me at the bottom of the screen, then tap Device Bind. BRfit searches for nearby devices.
  3. Choose DM71ORAVETTA appears in the list under its Bluetooth name, DM71. Tap it to bind.
  4. Accept the pairing requestYour phone shows a Bluetooth pairing request. Accept it to finish binding.
  5. Look for the signal iconOnce ORAVETTA is connected, a small signal icon appears on the time screen, between the day and the date. When it is not connected, that space is blank.Not connected? See Troubleshooting.
Manufacturer’s diagram of the time screen reading 20:36, MON, 12-07, with the connection icon circled between the day and the date. A blank space means disconnected; a signal-bar icon means connected.
The connection icon on the time screen. A blank space means ORAVETTA is not connected; signal bars mean it is.

When ORAVETTA connects to BRfit, it takes the time and date from your phone. Choose a 12-hour or 24-hour clock in BRfit.

Permissions: what is needed and what is optional

Phone permissions BRfit may ask for, and whether ORAVETTA needs them
Permission What it is for Needed?
Bluetooth (Nearby devices on Android) Finding, connecting and syncing ORAVETTA Needed
Phone pairing request Completing the Bluetooth connection when you bind ORAVETTA Needed
Notifications Showing a message icon on ORAVETTA when a message arrives Optional
Camera and photos The remote camera shutter Optional
Location Recording outdoor workout routes with your phone. Some older Android versions also require it for Bluetooth scanning. Optional, except where your Android version requires it to scan
Background activity or battery optimization (Android) Helping BRfit keep the connection steady Optional

You can change these choices later in your phone’s settings for BRfit. If a feature does not work, check that BRfit has the permission listed for it.

05 · On the Wrist

Touch Controls & Screens

One small circle does everything: a tap moves on, a press and hold makes a choice.

Manufacturer’s diagram of a fingertip on the small circle below the display, with an enlarged view labeled Effective Touch Area.
The effective touch area is the small circle just below the display.
Touch gestures
Tap Move to the next screen
Press and hold Start or stop a reading, open a menu, or confirm a choice
Press and hold while off Switch ORAVETTA on

The screens

Each tap moves to the next screen. The screens are:

  • Time: the time, day, date and the connection icon
  • Steps, distance and calories: today’s activity so far
  • Sleep: your estimated sleep from last night
  • Heart rate and blood oxygen: readings on request
  • Counter: a simple tap counter
  • Battery: the remaining charge
  • Settings: power, restart and reset

The display goes dark between glances to save battery. Tap the touch area to wake it, or raise your wrist if wrist wake is on in BRfit.

Take a heart-rate or blood-oxygen reading

  1. Find the screenTap until you reach the heart-rate screen (Bpm) or the blood-oxygen screen (SpO2).
  2. StartPress and hold the touch area. The icon flashes while ORAVETTA measures, and the reading appears on the display. Keep your arm still and relaxed.
  3. StopPress and hold again to end the reading.
Manufacturer’s screen examples. Top: the Bpm screen before a reading, then showing 83. Bottom: the SpO2 screen before a reading, then showing 96 percent.
Example screens before and during a reading. Your readings will differ.

Use the counter

  1. Start countingTap until you reach the counter screen, then press and hold. The screen flashes once and counting mode begins.
  2. CountEach tap adds one.
  3. Exit or clearPress and hold to open the menu. Tap to choose Exit (the arrow) or Clear (the bin), then press and hold to confirm.
Manufacturer’s screen examples of the counter at 0, the counter at 60, and the menu with an exit arrow and a bin icon.
The counter at zero, while counting, and its Exit and Clear menu.

Settings: power off, restart and reset

Tap until you reach the Settings screen, then press and hold to open it. Settings holds MAC Address, Software Version, Power Off, Reboot Device and Reset to Factory Settings. Tap to move between them.

  1. Choose the actionOn the Power off screen, press and hold. The screen flashes once and the cursor moves to YES.
  2. Confirm or cancelWith the cursor on YES, press and hold to switch off. To cancel, tap once to move the cursor to NO, then press and hold to leave the screen.

Reboot Device and Reset to Factory Settings work in the same way. A factory reset clears ORAVETTA, so open BRfit first while it is connected to let your latest readings sync.

Manufacturer’s screen examples: the Settings screen with a wrench and screwdriver icon, the Power off screen with NO underlined, and the Power off screen with YES underlined to confirm.
Settings, Power off, and Power off with YES selected.

06 · The Bracelet

Fit & Sizing

A snug fit looks better on the wrist and gives steadier readings.

Wearing ORAVETTA

  • Display up, sensor down. The display faces you and the sensor on the back rests flat against your skin.
  • Just above the wrist bone. Wear the case on the top of your wrist, just above the bone.
  • Snug but comfortable. The case should not slide around your wrist as you move. If light can reach under the case, readings can be less steady.

Sizing the bracelet

With every link in place, the bracelet measures about 190 mm (7.5 in) around the inside. If that is loose on you, remove links with the included tool for a closer fit.

  • Remove links evenly from both sides of the case where you can, so the case stays centered on your wrist.
  • Remove one link at a time and try the fit before you remove another.
  • Work over a soft cloth on a table, so small parts cannot roll away.
  • Keep every link and part you remove in the gift box. If you return ORAVETTA, include them so the bracelet is complete.

If you would rather not size the bracelet yourself, a jeweler or watch repairer can do it in a few minutes. You are also welcome to email us before you start.

Your skin

After exercise, take ORAVETTA off, then clean and completely dry your wrist and the case. Give your skin regular breaks. Stop wearing ORAVETTA if you notice persistent redness, swelling, itching or other discomfort, and consult a qualified healthcare professional if symptoms continue.

07 · Every Day

Readings & App Tools

Glance at the essentials on your wrist. Open BRfit for the full picture.

What ORAVETTA records

Activity

Steps, distance and estimated calories through the day, on the wrist and in BRfit. Distance can be shown in kilometers or miles. If BRfit asks for your profile details, fill them in for better estimates.

Sleep

Wear ORAVETTA to bed. In the morning, see your estimated sleep on the sleep screen, and the night in more detail in BRfit.

Heart rate and blood oxygen

Take a reading on the wrist at any time (see Touch Controls & Screens). In BRfit you can also turn on all-day monitoring and choose how often readings are taken. More frequent readings use more battery.

Workouts

Choose from 105 sport modes in BRfit. Start the workout in the app and carry your phone for outdoor routes, which use your phone’s location.

For steadier readings

  • Wear ORAVETTA snugly, with the sensor flat against your skin.
  • Keep the sensor window clean and dry.
  • Stay still and relaxed while a reading is taken.
  • If a reading seems unusual or does not match how you feel, take it again in these conditions.

A note on wellness readings

ORAVETTA and BRfit are for general wellness. They are not medical devices and are not intended to diagnose, treat, cure or prevent any disease. Data and readings are for reference only. They are estimates, and they can be affected by your skin, fit, movement and surroundings.

Do not change medication or treatment because of a reading, and do not use ORAVETTA as the sole basis for any medical decision. If you have symptoms or concerns, consult a qualified healthcare professional.

If you have a pacemaker or other implanted electronic device, consult your physician before using the heart-rate function. The sensor emits light; if you have epilepsy or are sensitive to flashing lights, consult your physician before using these functions.

Alerts on your wrist

ORAVETTA has no vibration or sound. Every alert is a small icon on the display, so it is something you see at a glance rather than feel.

Messages

A message icon appears when a supported message arrives. The content stays private on your phone; open it there to read and reply. Two switches must both be on: message alerts in BRfit, and notification access for BRfit on your phone.

Alarms

Alarms you set in BRfit appear as an icon on the display. Because ORAVETTA has no vibration or sound, an alarm will not wake you. Use your phone for wake-up alarms.

Goals and battery

An icon appears when you reach your daily goal, and when the battery is low.

App tools

Wrist wake

Turn on wrist wake in BRfit to light the display when you raise your wrist, and set the hours when it is active. Leaving it off at night saves battery.

Remote camera shutter

Open the camera feature in BRfit, set your phone down and shake your wrist to take the picture. It works only while ORAVETTA is connected.

Clock format

Choose a 12-hour or 24-hour clock in BRfit.

Keeping ORAVETTA up to date

Keep BRfit and your phone’s operating system up to date. When BRfit offers a firmware update for ORAVETTA, install it with ORAVETTA charged and close to your phone, and keep the app open until the update finishes. Install updates only through BRfit.

08 · Longevity

Care, Water & Storage

A few simple habits keep the finish bright and ORAVETTA working well.

Water

ORAVETTA is IP68 rated for rain, splashes and handwashing. Remove it before swimming, showering, bathing, diving or any high-pressure water, and keep it away from hot water, hot tubs, saunas and steam, which can get inside the case. An IP rating does not on its own make a device suitable for swimming.

Water damage from use outside these limits is not covered by the warranty. Water resistance can also decrease over time with age, knocks, and contact with soap, perfume, lotion, salt water or pool chemicals.

Cleaning

Unplug the charger first. Wipe the case and bracelet with a soft, slightly damp, lint-free cloth, then dry them, especially the charging port and the sensor window. Do not use bleach, solvents, abrasive cloths or ultrasonic cleaners, which can dull the electroplated finish.

The finish

The case and links have a high-gloss electroplated finish. Put ORAVETTA on after perfume, lotion and hairspray rather than before, and take it off for the gym, gardening and cleaning to protect the shine.

Heat and sunlight

Do not leave ORAVETTA in direct sunlight, such as on a car dashboard or a windowsill. Keep it away from heat sources and open flames, including stoves, ovens, microwave ovens, induction cooktops, water heaters and candles.

Storage

Store ORAVETTA clean and dry in its gift box. For longer storage, see Charging & Power.

Safety

ORAVETTA is not a toy. Children should use it only with adult supervision. Keep ORAVETTA, its links, the tool and the cable away from children and pets, who could swallow or bite them. Do not look at or operate ORAVETTA while driving, cycling or operating machinery. Follow posted instructions in places that restrict radio devices, such as fuel stations, blasting areas and aircraft.

Before passing it on or returning it

Open BRfit while ORAVETTA is connected so your latest readings can sync. Then remove ORAVETTA from BRfit and from your phone’s Bluetooth settings. If you would like help clearing it, email us before you send it.

Recycling

Do not dispose of ORAVETTA or its battery with household waste. Take it to an electronics collection point or use the take-back route available where you live. Do not try to remove the battery yourself.

09 · Should You Need Us

Troubleshooting

Start with the simple checks. Most issues are settled there.

Symptoms, what to check first, and what to do next
If this happens Check first Then
ORAVETTA will not turn on It may still be in shipping mode or out of charge. Attach the charging cable and plug it into a 5V USB adapter; the light on the back should glow red. Charge for a while, then press and hold the touch area. If there is no light and no display after charging, email us.
The touch area does not respond You are touching the small circle below the display, not the display itself. Your fingertip and the case are clean and dry. For a press and hold, keep your finger on the circle until the screen changes or flashes. If it still does not respond, place ORAVETTA on its charger for a moment.
BRfit cannot find ORAVETTA ORAVETTA is charged and on. Bluetooth is on and BRfit is allowed to use it. ORAVETTA is close to your phone. You are looking for the name DM71. On older Android versions, location access is also on for BRfit. Close and reopen BRfit, then go to Me and Device Bind again. If ORAVETTA was connected to another phone, remove it there first. Still nothing? Email us.
Binding fails or the pairing request did not appear Whether a pairing request is waiting behind BRfit. If DM71 is listed in your phone’s Bluetooth settings but will not connect, remove it there (on iPhone, Forget This Device), then bind again from BRfit.
No signal icon on the time screen A blank space means ORAVETTA is not connected. Bluetooth is on and your phone is nearby. Open BRfit near ORAVETTA. On Android, allow BRfit to run in the background or exclude it from battery optimization.
The time or date is wrong ORAVETTA is connected to BRfit, and your phone’s own time is correct. Open BRfit with ORAVETTA nearby so it can update. Choose the 12-hour or 24-hour clock in BRfit.
No message icons ORAVETTA is connected. Message alerts are on in BRfit, and BRfit has notification access on your phone. Focus or Do Not Disturb may hold alerts back. Turn the alert off and on again in BRfit and test with a message. Remember that alerts are icons only; ORAVETTA does not vibrate.
The display does not light when I raise my wrist Wrist wake is on in BRfit, and the time is within the hours you set for it. Tap the touch area to wake the display at any time.
Readings are missing or a reading seems unusual The fit is snug, the sensor window is clean, and you were still during the reading. For sleep, ORAVETTA was worn through the night. Repeat the reading while still and relaxed, and open BRfit near ORAVETTA to sync. If you have symptoms or concerns, consult a qualified healthcare professional.
ORAVETTA will not charge The magnetic end sits squarely on the charging port. The port and cable end are clean and dry, with nothing metal between them. The adapter is rated 5V. Try another 5V USB adapter or port. If the light still does not come on, stop and email us. If ORAVETTA is hot, swollen or damaged, disconnect it and do not use it.
The battery drains faster than expected How often all-day readings are taken, and whether wrist wake is on through the night. Take readings less often, limit wrist wake to waking hours and install any firmware update BRfit offers. If the battery still drains quickly with light use, email us.
ORAVETTA seems stuck Whether it responds to a tap. Use Reboot Device in Settings. If it does not respond at all, place it on its charger. Use Reset to Factory Settings only as a last step.

When you write to us

Email hello@novacchi.com and include:

  • Your order number and ORAVETTA color
  • Your phone model and its iOS or Android version
  • The step you reached, what you expected and what happened instead
  • What you have already tried from the table above
  • A photo, screenshot or short video, where it helps

10 · The Details

Specifications & Support

ORAVETTA specifications
Form Smart bracelet watch with an open-link bracelet
Colors Rose Gold · Silver
Display 0.66-inch OLED · 64 × 48 pixels · single-point touch area
Case 26.2 mm wide · 32.2 mm long
Weight About 24.8 g with the bracelet
Bracelet About 190 mm (7.5 in) around the inside with all links · removable links · link-removal tool included
Materials Zinc-alloy case frame and links with a high-gloss electroplated finish · ABS case back
Companion app BRfit · free · no subscription required
Compatibility iPhone with iOS 13.0 or later · Android phones via Google Play
Connectivity Bluetooth 5.2 Low Energy · Bluetooth name DM71
Sensors Optical heart-rate and blood-oxygen (SpO₂) sensor
On the bracelet One touch area · no buttons · no vibration, speaker or microphone
Battery Built-in rechargeable lithium-ion, 40 mAh, not user-replaceable
Battery life 5 to 6 days of typical use · up to 35 days on standby (manufacturer’s estimates; varies with use)
Charging Magnetic charging cable · USB power adapter rated 5V (not included) · about 2 hours to full · red light while charging, green when full
Water IP68 rated for rain, splashes and handwashing · not for swimming, showering or bathing
Display language English, mainly icons
Markings CE · WEEE

Warranty and returns

Every ORAVETTA is covered for one year against manufacturing defects, from the date of delivery. If ORAVETTA arrives with a fault, tell us within 14 days of delivery. You may start a return within 30 days of delivery; a full refund requires the original gift box, the charging cable and the complete bracelet, including any links you removed.

Please email us before sending anything back, so we can confirm your return and give you the correct return address. Full terms are on our Returns & Warranty page and in our Refund Policy.

Disposal

The crossed-out wheeled bin on ORAVETTA means it must not be thrown away with household waste. Take it to a collection point for electrical and electronic equipment so it can be recycled.